158 iSeries and AS/400e System Builder
#2612 #2612 EIA 232/V.24 One-Line Adapter (SPD)
The #2612 connects to #2623 to support one communication line using Async, BSC, SDLC, or X.25 protocols. One cable
must be specified:
#9023 EIA 232/V.24 20-ft (6 m) enhanced cable
#9835 EIA 232/V.24 50-ft (15 m) enhanced cable
#9022 EIA 232/V.24 20-ft (6 m) cable
#9836 EIA 232/V.24 50-ft (15 m) cable
SPD slots required: None
Prerequisite: #2623 6-line Communications Controller
#2613 #2613 V.35 One-Line Adapter (SPD)
The #2613 connects to #2623 to support one V.35 communications line using either BSC, SDLC, or X.25 protocols. Each
#2623 supports one V.35 line at speeds up to 640 Kbps, or two V.35 lines at speeds up to 512 Kbps, or three V.35 lines at
speeds up to 384 Kbps. No other adapters are allowed on the #2623 when running T1/E1/J1. One cable must be specified:
#9020 V.35 20-ft (6 m) cable
#9838 V.35 50-ft (15 m) cable
SPD slots required: None
Prerequisite: #2623 6-line Communications Controller
#2614 #2614 X.21 One-Line Interface Adapter (SPD)
The #2614 connects to #2623 to support one communications line using X.21 or X.25 networks. One cable must be
specified:
#9021 X.21 20-ft (6 m) cable
#9839 X.21 50-ft (15 m) cable
SPD slots required: None
Prerequisite: #2623 6-line Communications Controller
#2620 #2620 Full Cryptographic Processor (SPD)
The #2620 provides full cryptographic support for encrypting and decrypting data. Distribution of the #2620 is restricted by
U.S. Government Export Regulations. In countries (regions) outside the U.S.A and Canada, it can only by marketed to
financial institutions and subsidiaries of U.S. companies. If a #2620 cannot be installed, a #2628 should be used in its
place.
SPD slots required: One
Maximum: One for the Model 720; three for the Model 730 and 740
#2623 #2623 Six-Line Communications Controller (SPD)
The #2623 provides for attachment of a wide range of iSeries or AS/400e communications adapters. The following IOA
adapters are supported by the #2623: #2605, #2609, #2610, #2612, #2613, #2614, #2654, #2655, #2656, #2657, #2658,
#2659, #6153, and #6173. The #2623 supports two #2605 ISDN adapters or up to three EIA 232/V.24, X.21, and V.35
adapters. It is available for 720, 730, and 740 systems to work with the #2605 ISDN Basic Rate Interface Adapter.
SPD slots required: One
#2629 #2629 LAN/WAN/Workstation IOP (SPD)
The #2629 supports up to three LAN/WAN/ Workstation IOAs. See the full description of #2629 in “Workstation controllers”
on page 154.
The #2629 was withdrawn from marketing on 31 May 2001.
#2628 #2628 Limited Cryptographic Processor (SPD)
The #2628 provides the same function as #2620 except that it does not include data encryption and decryption using
commercial Data Masking Facility for data scrambling. Can be marketed to any non-U.S. company.
SPD slots required: One
Maximum: One for the Model 720; three for the Models 730 and 740
#2654 #2654 EIA 232/V.24 Two-Line IOA
The #2654 connects to #2623 to support two communications lines supporting Async, BSC, SDLC, or X.25 protocols using
two EIA 232/V.24 20-ft (6.2 m) enhanced cables.
SPD slots required: None
Prerequisite: #2623 6-Line Communications Controller
