360 iSeries and AS/400e System Builder
3583 Lxx
(cont.)
#8003
#8004
#8103
#8104
#8105
#1450
#1660
#8005
#8006
#8007
#8008
#8012
#9450
#2895
#5096
#5099
#5301
#5302
#5305
#5310
#5318
#5325
#5602
#5605
#5610
#5620
#5625
#5907
#5913
#5922
3583-Lxx Ultrium Scalable Tape Library
and might be added to existing libraries as an MES. It is a required feature for all libraries containing an Ultrium 2
Tape Drive. The RMU/Specialist must be installed to add multipath support. The RMU/Specialist function is included
on every 3583 shipped since 27 July 2001. Machines shipped prior to 27 July 2001 must have #1660 RMU/Specialist
installed.
If a customer intends to partition a 3583 library, more than one 18-slot storage column (#8007) is required. This is due
to that fact that cartridge slot partitioning is done at the granularity of 18-slot columns. For example, if two partitions
are required, then a total of two 18-slot storage columns are required. In this scenario, a 3583-L18 with an additional
18-slot storage column or a 3583-L36 is required.
Adapters supported:
LVD Drive Sled (#8103)
#5702 PCI-X Ultra Tape Controller, #5705 PCI-X Tape/DASD Controller,
#5712 PCI-X Tape Controller ((LVD, VHDCI), #5715 PCI-X Tape/DASD Controller (LVD, VHDCI)
HVD Drive Sled (#8004 or #8104)
#2729 PCI Magnetic Media Controller (HVD, HD68)
#2749 PCI Ultra Magnetic Media Controller (HVD, HD68)
#6501 Tape/Disk Device Controller (HVD, requires 2895 Interposer)
#6534 Magnetic Media Controller (HVD, HD68)
Fibre Drive Sled (#8105)
#2765 PCI Fibre Channel Tape Controller (LC)
#5704 PCI-X Fibre Channel Tape Controller (LC)
The 3583 library requires one tape drive sled and can have up to six installed. With Ultrium 1, the iSeries support one
HVD SCSI drive. Up to 6 LVD SCSI drives are supported if using the #8005 SAN Data Gateway Module for attaching
to the #2765 or #5704.
We recommend that the #8105 LTO Ultrium 2 Fibre Drive Sled is
not installed in the same 3583 library with the #8005
SAN Data Gateway Module.
Drive features:
LTO Ultrium LVD Drive Sled (for iSeries, only valid when using #8005 SAN Data Gateway Module)
LTO Ultrium HVD Drive Sled (HD68 connection)
LTO Ultrium 2 LVD Drive Sled (HD68 connection)
LTO Ultrium 2 HVD Drive Sled (HD68 connection)
LTO Ultrium 2 Fibre Drive Sled (LC connection)
Library features:
Multipath field
RMU/Specialist
SAN Data Gateway Module
Rack mount option
18 slot tape storage column
Redundant power module
12-cartridge I/O station
Multipath plant
Cable features:
Interposer for AS/400 #6501
Interposer SC-LC Fibre
VHDCI/HD68 Cable/Interposer
0.4 m HD68/HD68 SCSI cable (use to daisy-chain two tape drives on the same SCSI bus)
2.5 m (8-ft) HD68/HD68 SCSI cable
5.0 m (16-ft) HD68/HD68 SCSI cable
10.0 m (33-ft) HD68/HD68 SCSI cable
18.0 m (59-ft) HD68/HD68 SCSI cable
25.0 m (82-ft) HD68/HD68 SCSI cable
2.5 m (8-ft) VHDCI/HD68 SCSI cable
5.0 m (16-ft) VHDCI/HD68 SCSI cable
10.0 m (33-ft) VHDCI/HD68 SCSI cable
20.0 m (66-ft) VHDCI/HD68 SCSI cable
25.0 m (82-ft) VHDCI/HD68 SCSI cable
7 m SC-LC Fibre Channel Cable
13 m SC-LC Fibre Channel Cable
22 m SC-LC Fibre Channel Cable
