Chapter 7. IBM iSeries 820, 830, and 840 features and placement 265
#2793
#9793
(cont.)
#2793 2-Line WAN IOA with Modem
The #0367 cable ships with a 25-pin to 9-pin adapter.
When #0140 logical partitioning is specified, multiple #0367 cables can be ordered to connect the operations console in
each partition.
ECS is supported from the RVX port and one of the following cables is required to support ECS: #0348, #0349, or #0365.
ECS is supported from the Modem port (OS/400 V5R1 or later).
#2793 2-Line WAN IOA with Modem
The #2793 does not support the remote ring indicate function.
For further configuration information, see:
‘http://www.iseries.ibm.com/tstudio/planning/esa/esa.htm
See the “Soft rules: iSeries IOA requirements” topic in PCI Card Placement Rules for the IBM eServer iSeries Server,
REDP-3638 for additional restrictions.
Minimum operating system level: OS/400 V5R2
The #2793 is a Customer Install Feature.
#2794
#9794
#2794 2-Line WAN IOA with Modem
The #2794/#9794 is a 2-line WAN with modem adapter and is the CIM version that is offered only in Australia and New
Zealand. Port 0 is the modem port and supports V.92 56K Async PPP, V.92 data modem, V.44 data compression, and V.34
Fax modem and Fax functions such as ECM and 2D/1D conversion. Port 0 does not provide sync modem capabilities
(SDLC and Sync PPP). Port 1 is the RVX port and supports multiple communications protocols
The #2794 can be attached directly to a Linux partition. When ordered as #0615 - Direct Attach - #2794 PCI 2-Line WAN
with Modem, an IOP is not required. When attached directly to a Linux partition, the #2794 cannot be accessed by OS/400
partitions.
Select one of the following cables to attach to port 0 (modem port):
#1019 Modem Cable-Australia
#1020 Modem Cable-China (Hong Kong S.A.R.)/New Zealand
Select one of the following cables to attach to port 1 (RVX port): #0348, #0349, #0353, #0354, #0356, #0359, #0360, #0365
or #0367. Select one of the following cables to attach to port 1 (RVX port):
#0348 V.24/EIA232 20-ft (6 m) PCI cable
#0349 V.24/EIA232 50-ft (15 m) PCI cable
#0353 V.35 20-ft PCI cable
#0354 V.35 50-ft PCI cable
#0355 V.35 80-ft/24 m PCI cable
#0356 V.36 20-ft PCI cable
#0358 V.36 150-ft/45 m PCI cable
#0359 X.21 20-ft PCI cable
#0360 X.21 50-ft PCI cable
#0365 V.24/EIA232 80-ft PCI cable
#0367 Operations Console PCI Cable
The #0367 cable ships with a 25-pin to 9-pin adapter.
When #0140 logical partitioning is specified, multiple #0367 cables can be ordered to connect the operations console in
each partition.
ECS is supported from the RVX port and one of the following cables is required to support ECS; #0348, #0349 or #0365.
ECS is supported from the Modem port (OS/400 V5R1 or later).
The #2794 does not support the remote ring indicate function.
For further configuration information, see:
http://www.iseries.ibm.com/tstudio/planning/esa/esa.htm
See the “Soft rules: iSeries IOA requirements” topic in PCI Card Placement Rules for the IBM eServer iSeries Server,
REDP-3638 for additional restrictions.
Minimum operating system level: OS/400 V5R2
The #2794 is a Customer Install Feature.
