116 iSeries and AS/400e System Builder
#9793
#9794
#9793 Two-Line WAN IOA with Modem
The #9793 feature is a base 2-line WAN with Modem adapter and is the non-CIM version which is offered in all countries
or regions except Australia and New Zealand. The #9794 feature is a base 2-line WAN with Modem adapter and is the CIM
version, which is offered only in Australia and New Zealand. Port 0 is the modem port and supports V.92 56K Async PPP,
V.92 data modem, V.44 data compression, V.34 Fax modem, and Fax functions such as ECM and 2D/1D conversion. Port
0 does not provide Sync modem capabilities (SDLC and Sync PPP). Port 1 is the WAN port and supports multiple
communications protocols.
The IBM marketing configurator defaults one of the following country- or region-specific cables to attach to port 0 (modem
port):
#1010 Modem Cable-Austria
#1011 Modem Cable-Belgium
#1012 Modem Cable-Africa
#1013 Modem Cable-Israel
#1014 Modem Cable-Italy
#1015 Modem Cable-France
#1016 Modem Cable-Germany
#1017 Modem Cable-United Kingdom
#1018 Modem Cable-Iceland/Sweden
#1021 Modem Cable-Finland/Norway
#1022 Modem Cable-Netherlands
#1023 Modem Cable-Swiss
#1024 Modem Cable-Denmark
#1025 Modem Cable-U.S./Canada
Select one of the following cables to attach to port 1 (WAN port):
#0348 V.24/EIA232 20-ft. (6 m) PCI cable
#0349 V.24/EIA232 50-ft. (15 m) PCI cable
#0353 V.35 20-ft PCI cable
#0354 V.35 50-ft PCI cable
#0355 V.35 80-ft/24 m PCI cable
#0356 V.36 20-ft PCI cable
#0358 V.36 150-ft/45 m PCI cable
#0359 X.21 20-ft PCI cable
#0360 X.21 50-ft PCI cable
#0365 V.24/EIA232 80-ft PCI cable
#0367 Operations Console PCI Cable
The #0367 cable ships with a 25-pin to 9-pin adapter.
Multiple #0367 cables can be ordered (but only one per #9793) to serve as consoles for secondary partitions when logical
partitioning (#0140) is specified.
The #9793 does not support the remote ring indicate function.
ECS is supported from the WAN port and one of the following cables is required to support ECS #0348, #0349, or #0365.
ECS is supported from the Modem port (OS/400 V5R1 or later).
Disk units
#08xx Load Source Specify
One of the following specify codes is required on all initial orders of a Model 270 from OS/400 V5R1 onward:
#0826 - #4314 Load Source specify
#0827 - #4324 Load Source specify
#0828 - #4317 Load Source specify
#0829 - #4318 Load Source specify
#0830 - #4319 Load Source specify
The #0826 and #0827 features are supported for upgrades only.
Manufacturing uses this specify to place the corresponding disk unit feature in the load source position. The specify codes
can be changed on model upgrades or on MES orders.
The #0826, #0827, #0828, #0829 were withdrawn from marketing on 01 June 2006.
#4314 #4314 8.58 GB Disk Unit Ultra SCSI
The #4314 provides an additional 3 ½-inch two-byte single disk unit with 8.58 GB capacity (7200 RPM).
Minimum operating system level: OS/400 V4R4
The #4314 is a Customer Install Feature.
The #4314 was withdrawn from marketing on 31 January 2001.
