314 iSeries and AS/400e System Builder
1750
(cont.)
DS6000 model summary matrix
Model number Raw
physical
capacity
73 GB
(15, 000
rpm) drives
146 GB
(10, 000 rpm)
drives
300 GB
(10, 000
rpm) drives
Cache Power
DS6400 (411) 292 GB -
33.6 TB
1
Yes Yes Yes 2 GB Single
phase
DS6400 (511) 292 GB -
67.2 TB
2
Yes Yes Yes 4 GB Single
phase
DS6000
Expansion
Enclosure (EX1)
292 GB -
4.8 TB per
enclosure
Yes Yes Yes N/A Single
phase
Notes:
1. Using 6 fully populated DS6000 Expansion Enclosures (1750-EX1) with 300 GB disks
2. Using 13 fully populated DS6000 Expansion Enclosures (1750-EX1) with 300 GB disks
DS6000 Copy Service Functions
The following Copy Service Functions are supported with the iSeries: IBM TotalStorage FlashCopy, Metro Mirror, Global
Mirror, Metro/Global Copy
Use of these copy services on the iSeries requires creating a copy of the iSeries load source unit (LSU) on the DS6000.
Refer to IBM eServer iSeries in Storage Area Networks: Implementing Fibre Channel Disk and Tape with iSeries,
SG24-6220, for additional copy services support details.
#2766 PCI Fibre Channel Disk Controller and #2787 PCI-X Fibre Channel Disk Controller attachment:
Fibre attachment to the iSeries server is either directly to a TotalStorage DS6000 (point-to-point) or through a supported
SAN switch. Appropriate fibre cables must be provided to connect the iSeries to the DS6000 or to a SAN. The
TotalStorage DS6000 attaches with LC connectors. The #2766 and #2787 adapters have an LC connector.
Each #2766 or #2787 supports 32 LUNs. Each LUN can be 8.58 GB, 17.54 GB, 35.16 GB, 36.00 GB, or 70.56 GB.
SAN support:
Refer to the following Web sites for the latest information about switch and SAN device support for the iSeries servers:
http://www.ibm.com/servers/eserver/iseries/hardware/storage/sansupport.html
http://www-1.ibm.com/servers/storage/support/san/index.html
