Chapter 7. IBM iSeries 820, 830, and 840 features and placement 259
7.6 Workstation controllers and console features
#4710
#4810
#9710
(cont.)
#4710/#4810/#9710 PCI Integrated xSeries Server
When a LAN feature is used in conjunction with a #4710, the following ordering rules apply:
One #0223 100 Mbps Token-Ring Specify is required for each #2744 driven.
One #0226 1 Gbps Ethernet Specify is required for each #5700/#5701 driven.
Up to three IOA LAN features can be supported by the #4710/#4810, depending on the system unit or tower position
into which the #4710, #4810, or #9710 is placed.
Native OS/400 functions are not supported.
The #4710, #4810, or #9710 do not support external host LAN.
The #4710, #4810, or #9710 do not require a #2843, #2844, #9943 or #9844. Placement is limited to specific slots within
the selected system unit and expansion tower. The #4710, #4810, or #9710 require two PCI card slots, and do not hang
over a third slot. The #4710, #4810, or #9710 ship with a standard keyboard and mouse splitter cable and can support
either standard or USB 1.1 keyboard, mouse, or both. Windows 2000 Server with PTFs and Windows 2003 Server
operating systems are supported.
The following apply:
#0325 (IPCS Extension Cable for Windows) is the default (but can be removed).
A minimum of 1 GB server memory is required.
#1700 (IPCS keyboard or mouse for Windows) is default (in countries offering it).
A display must be connected to the Integrated Server to support Windows.
For a non-US keyboard/mouse and display, see:
http://www.ibm.com/eserver/iseries/integratedxseries/
The #4710/#9710 is supported in the system unit of Models 820, 830, and 840. It is also supported in the following
expansion towers when attached to these models: #0578, #0588, #0595, #5074, #5075, #5078, #5079, #5088, #5094,
#5095, and #5294, #8079, and #9079.
The #9710 is supported in the following expansion towers when attached to the #0578, #0588, #0595, #5074, #5075,
#5078, #5079, #5088, #5094, #5095, and #5294 Expansion Towers.
Minimum operating system level: OS/400 V5R2 with PTFs identified in Information APAR II13609 at:
http://www.ibm.com/eserver/iseries/support
The #4710 is the recommended replacement for the #2792 PCI Integrated xSeries Server.
The #4810 is the recommended replacement for the #2892 PCI Integrated xSeries Server.
The #4710, #4810 and #9710 were withdrawn from marketing on 01 June 2006. The #4812 PCI Integrated xSeries Server
is the recommended replacement.
Workstation controllers and console features
#4746
#9746
#4746 PCI Twinaxial IOA
The #4746 PCI Twinaxial IOA provides support for up to 40 active twinaxial displays and printers addresses or up to 120
active shared sessions. A 20-ft (6.2 m) cable with an eight-port expansion (breakout) box is included with this adapter. Each
port supports seven attached devices, allowing for 56 total attached devices, of which only 40 can be active.
The #9746 Base PCI Twinaxial IOA is allowed only on new systems. If the client does not select the feature on the initial
order, they are not entitled to receive the feature in the future. The #9746 has a prerequisite of an #0864 and #7400.
Supported in Models 820, 830, and 840
The #4746 is a Customer Install Feature.
The #9746 was withdrawn from marketing on 01 October 2005.
#5540 #5540 System Console on Twinaxial Workstation IOA
A system console specify code must be selected on each new order. When the #5540 is on the order, the system console
is driven by a #4746 PCI Twinaxial IOA.
Supported on Models 820, 830, 840
