112 iSeries and AS/400e System Builder
#4805 #4805 PCI Cryptographic Accelerator
The #4805 provides improved performance for high transaction rate secure Web applications, which use the Secure
Sockets Layer (SSL) or Transport Layer Security (TLS) protocols. The process of using SSL/TLS secure Web connections,
is very compute intensive. The Cryptographic Accelerator can be used to off-load cryptographic processing from main
CPU. SSL/TLS secure Web connections are used to protect information (for example, credit card number) as it is
transferred over the Internet, for example between a Web browser and a server.
The Cryptographic Accelerator is targeted to high transaction rate secure Web applications using SSL/TLS. If your
application requires a FIPS 140-1 certified, tamper-resistant module for storing cryptographic keys, financial PIN
processing, or both, then the #4801 PCI Cryptographic Coprocessor should be your choice.
Federal Information Processing Standard (FIPS) 140-1 is a U.S. Government National Institute of Standards and
Technology (NIST) administered standard and certification program for cryptographic modules. There is a maximum of two
per IOP.
Prerequisites: Available PCI card slot under a feature IOP (not under a base or embedded IOP in the system unit)
Minimum operating system level: OS/400 V5R2
The #4805 is a Customer Install Feature.
The #4805 was withdrawn from marketing on 01 June 2006.
#4815 #4815 PCI ATM 155 Mbps UTP OC3
The #4815 is a 155 Mbps ATM PCI card that allows the iSeries or AS/400e server to be attached to an ATM network using
the Unshielded Twisted Pair (UTP-5) interface. This interface is intended for connection to both local area switches and
direct connection to service provider equipment. The #4815 is used typically where 155 Mbps speeds are required over
distances of less than 100 meters. Technical specifications and industry standards supported are available at the ATM
Forum Web site at:
http://www.atmforum.com
ATM is not supported after OS/400 V5R2. Upgrade to Ethernet.
Minimum operating system level: OS/400 V4R5
The #4815 is a Customer Install Feature.
#4816 #4816 PCI ATM 155 Mbps MMF
The #4816 is a 155 Mbps ATM PCI card that allows the iSeries or AS/400e to be attached into an ATM network using the
MMF 62.5 micron interface. This interface is intended for connection to both local area switches and direct connection to
service provider equipment. The #4816 is used typically where 155 Mbps speeds are required over distances of less than
2 km. Technical specifications and industry standards supported are available at the ATM Forum Web site at:
http://www.atmforum.com
The #4816 is ordered for use in OS/400 V4R5 secondary partitions. For OS/400 V5R1 systems or partitions, the #2817
PCI 155 Mbps MMF ATM IOA should be ordered.
Minimum operating system level: OS/400 V4R5
The #4816 is a Customer Install Feature.
ATM is not supported after OS/400 V5R2. Upgrade to Ethernet.
#4818 #4818 PCI ATM 155 Mbps SMF OC3
The #4818 is a 155 Mbps ATM PCI card that allows the iSeries or AS/400e to be attached into an ATM network using the
Single-Mode Fiber (SMF) 9 micron interface. This interface is intended primarily for direct connection to service provider
equipment. The #4818 is used typically where 155 Mbps speeds are required over distances of from 16 to 40 km. Technical
specifications and industry standards supported are available at the ATM Forum Web site at:
http://www.atmforum.com
ATM is not supported after OS/400 V5R2. Upgrade to Ethernet.
Minimum operating system level: OS/400 V4R5
The #4818 is a Customer Install Feature.
