234 iSeries and AS/400e System Builder
#5075
(cont.)
#5075 PCI Expansion Tower
#1474 - 6 m HSL to HSL-2 Cable
#1475 - 10 m HSL to HSL-2 Cable
Select one of the following SPCN cables per tower:
#1463 - 2 m SPCN Cable
#1464 - 6 m SPCN Cable
#1465 - 15 m SPCN Cable
#1466 - 30 m SPCN Cable
One #14xx power cord must be specified (geography dependent).
Maximum: Five
Supported on Model 820
The #5075 is a Customer Install Feature.
The #5075 was withdrawn from marketing on 21 November 2003.
#5077 #5077 Migration Tower II
The #5077 Migration Tower II is a feature I/O tower that supports SPD I/O cards and attaches SPD Expansion Towers and
#5065/#5066 PCI Expansion Tower.
When upgrading from a Model 640, S30, or 730 to a Model 830 or 840, the #5077 is a manufactured unit, and is shipped
without a “base” CD-ROM and without a base optical link card (CCIN 2696). The CD-ROM and optical link cards are
migrated. If upgrading from a Model 640, S30 or 730 without a #5055 Storage Expansion Unit installed, by default, the
#5077 is shipped with a #5057 Storage Expansion Unit (for 16 disk units). The #5057 can be removed from the order. If
upgrading from a Model 640, S30, or 730 with #5055 installed, a #5055 to #5057 conversion is performed.
When upgrading from a Model 650, S40, or 740, the #9251 Base I/O Tower on these models is converted to the #5077.
When upgrading from a Model 820 or 830 with #503X Migration Tower I, which has SPD cards or SPD towers attached,
the #5077 is a manufactured unit and is shipped with a “base” CD-ROM and with a base optical link card (CCIN 2696). The
#5077 can also be ordered to support clustering on the Models 830, 840. In this case, the #5077 is shipped as a
manufactured unit shipped with a “base” CD-ROM and with a base optical link card (CCIN 2696).
See the Model 640, 650, S30, and S40 sections of AS/400e RISC System Builder, REDP-0342, and 5.11, “AS/400e Models
720, 730, and 740 features” on page 148, for supported cards and devices.
One or two feature #2695 Optical Bus Adapters can be ordered for the #5077. Select one of the following HSL cables if the
#5077 has just the base optical link card installed. Select one or two (any combination) of the following HSL cables if the
#5077 has one or two #2695 Optical Bus Adapters installed:
#1460 - 3 m Copper HSL Cable
#1461 - 6 m Copper HSL Cable
#1462 - 15 m Copper HSL Cable
Select one of the following SPCN cables per tower:
#1463 - 2 m SPCN Cable
#1464 - 6 m SPCN Cable
#1465 - 15 m SPCN Cable
#1466 - 30 m SPCN Cable
One JTAG-E cable (6 m) is included with the #5077.
One #14xx power cord must be specified (geography dependent).
Maximum: One
The #5077 is mutually exclusive with #5033, #5034, and #5035.
Supported on Models 830 and 840
The #5077 was withdrawn from marketing on 01 January 2004.
