326 iSeries and AS/400e System Builder
3534 1RU
#2010
#2020
#5805
#5825
SAN Fibre Channel Managed Hub
The 3534-1RU Managed Hub is used to attach network devices to fiber-based transmission systems
such as Fibre Channel and gigabit Ethernet. It converts the serial electrical signals to serial optical
signals and serial optical signals to serial electrical signals. The managed hub is designed for
implementing multi-node server clusters and storage systems for high availability and disaster recovery
solutions.
Highlights:
1 Gb Fibre Channel
Seven shortwave ports standard, one port optional by adding shortwave or longwave GBIC
SC connections
For use with iSeries #2765, #2766, #2787, and #5704 PCI-X Fibre Channel Tape Controller (LC
Duplex)
9406 feature #0371, LC-SC Adapter Kit (50 micron) required to connect SC cable
Shortwave GBIC
Longwave GBIC
5 m multi-mode 50 micron cable (SC-SC)
25 m multi-mode 50 micron cable (SC-SC)
Minimum operating system level: OS/400 V5R1
For detailed device and server support details, go to:
ftp://service.boulder.ibm.com/storage/san/35341ru/SM35341RU.pdf
270, 820,
830, 840
Note:
* The QuickLoop RPQ (8S0521) provides the firmware that enables devices connected to ports of the switch to be handled as private
loop devices. QuickLoop creates a unique Fibre Channel topology that allows host bus adapters (such as the #2765 and #2766 with
OS/400 V5R1) that use FC-AL without knowledge of SAN fabric, to communicate with FC-AL storage devices. QuickLoop allows
individual switch ports to be designated as arbitrated loop ports, allowing a private host initiator to communicate with arbitrated loop
storage devices as though they were all contained in one logical loop.
Machine Description 9406
models
