Filter
Top Products
Programming NetMaster
97
210140
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
49. Special Cycle Option “+049”
This option allows the owner to program the machine
to offer extra wash time, extra rinse time, warm rinse,
or any combination of the above to the customers for
an added vend price.
How to Program Special Cycle Option
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES (+) or the COLD (-)
keypad until “PrOg” appears in the VFD. Press
the START (enter) keypad and “+001” will
appear in the VFD.
Figure 177
3. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the programmable
options until “+049” appears in the VFD. Refer
to Figure 178.
Figure 178
4. When “+049” appears in the VFD, press the
START (enter) keypad. A number will appear in
the VFD. This number corresponds to the current
Special Cycle Option Programming Value.
5. Locate the desired number in the first column of
Table 8 on the following page.
6. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the current
number until correct. Refer to Figure 179.
Figure 179
7. Press the START (enter) keypad when the
correct number appears in the VFD. The next
option, “+050”, will appear in the VFD.
NOTE: To program “+050” (Special Cycle Extra
Wash Time), refer to option 50. To program other
options, refer to the appropriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option,
not a value.
2. While pressing and holding the NORMAL
keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the ready mode. Refer to Figure 2.
C762I
C812I
C810I
C860I
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
1
32