Filter
Top Products
Programming NetMaster
210140
64
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
23. Start Pulse Value “+023”
This option allows the owner to program the value of
the Start Pulse if used for multiple pulses with an
after-market central card reader or pay system. Refer
to option 55 for additional information.
How to Program Start Pulse Value
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES (+) or the COLD (-)
keypad until “PrOg” appears in the VFD. Press
the START (enter) keypad and “+001” will
appear in the VFD.
Figure 97
3. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the programmable
options until “+023” appears in the VFD. Refer
to Figure 98.
Figure 98
4. When “+023” appears in the VFD, press the
START (enter) keypad. There are five digits in
the Start Pulse Value. The fifth digit will appear
in the VFD and will flash one second on and one
second off. Refer to Figure 99.
NOTE: If the Start Pulse Value is $100.00 or more,
the fifth digit is “1”. If the Start Pulse Value is
$99.99 or less, the fifth digit is “0”.
Figure 99
5. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the value of the
fifth digit. Refer to Figure 100.
NOTE: The Start Pulse Value can be set from 1 to
65,535.
Figure 100
C762I
C789I
C789I
C826I
C860I
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
C826I
1
32