Filter
Top Products
Programming NetMaster
210140
48
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
13. Special Vend A Start Date
“+013”
This option allows the owner to set the date that
Special Vend A will begin.
How to Program Special Vend A Start
Date
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES (+) or the COLD (-)
keypad until “PrOg” appears in the VFD. Press
the START (enter) keypad and “+001” will
appear in the VFD.
Figure 55
3. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the programmable
options until “+013” appears in the VFD. Refer
to Figure 56.
Figure 56
4. When “+013” appears in the VFD, press the
START (enter) keypad. The current start date
will appear in the VFD.
5. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the start date to
the desired date. Refer to Figure 57.
If “0” is selected and Special Vend A is on,
Special Vend A will occur at the time or days of
week selected, regardless of the date.
Figure 57
6. Press the START (enter) keypad when the
correct date appears in the VFD. The next option,
“+014”, will appear in the VFD.
NOTE: To program “+014” (Special Vend A End
Month), refer to option 14. To program other
options, refer to the appropriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option,
not a value.
2. While pressing and holding the NORMAL
keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the ready mode. Refer to Figure 2.
C762I
C775I
C775I
C860I
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
1
32