Filter
Top Products
11
210140
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
NetMaster Identification
Select Cycle Pads
(Refer to
Figure 1
)
SELECT CYCLE pads are used to select the specific
washer cycle. These pads include NORMAL, PERM
PRESS, and DELICATES. These pads allow the user
to select a cycle other than the default cycle (PERM
PRESS). The SELECT CYCLE keypads are not active
after the first fill cycle of the washer. The selected
cycle is indicated by the light (LED) on the pad.
Pressing the START pad will confirm the selection
and the cycle will begin. When the Smart Card is used,
the START pad flashes. Pressing the START pad will
start the cycle and deduct the vend price from the card.
Select Wash Temp Pads
(Refer to
Figure 1
)
SELECT WASH TEMP pads are used to select the
temperature of the water used for the wash fill. These
pads include HOT, WARM, and COLD. These pads
allow the user to select a water temperature other than
the default setting (WARM). The SELECT WASH
TEMP pads are active only during the first fill cycle of
the washer. The selected temperature is indicated by
the light (LED) on the pad.
Both the SELECT WASH TEMP pads and the SELECT
CYCLE pads are used in various combinations for
programming cycles, retrieving audit information,
running diagnostic tests, and other hidden operations.
These instructions cover the manual programming and
data retrieval options.
Figure 1
C832I
1 LED Light
2 SELECT CYCLE pads (top row)
3 Four 7-Segment Digits
4 VFD Display
5 LED Status Lights
6 START pad
7 SELECT WASH TEMP pads (bottom row)
1
2
3
4
5
6
Electronic Display Control
7