Filter
Top Products
Programming NetMaster
25
210140
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
How to Exit Programming Feature
1. Be sure the control shows a programmable
option, not a value.
2. While pressing and holding the NORMAL
keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the ready mode. Refer to Figure 2.
How to Read
Table 1
To determine the correct number required to program
the Audio Signal, use the following chart. The Signal
Value column contains the number required in step 5.
The other columns correspond to individual options.
Each column of options contains a unique combination
of the words “ON” and “OFF” that indicates if that
column’s option is turned on or off when the Signal
Value is entered. Select the desired combination of
options and enter the number found in the Signal
Value column.
Signal
Value
Remove
Card
Coin/Card
Input
End of
Cycle
Key
Pressed
0 OFF OFF OFF OFF
1 OFF OFF OFF ON
2OFFOFFON OFF
3OFFOFFON ON
4OFFON OFF OFF
5OFFON OFF ON
6OFFON ON OFF
7OFFON ON ON
8 ON OFF OFF OFF
9 ON OFF OFF ON
10 ON OFF ON OFF
11 ON OFF ON ON
12 ON ON OFF OFF
13 ON ON OFF ON
14 ON ON ON OFF
15 ON ON ON ON
Table 1