Filter
Top Products
Programming NetMaster
210140
58
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
6. Press the START (enter) keypad to enter the fifth
digit and display remaining four digits. The
active digit will flash one second on and one
second off. Refer to Figure 83.
Figure 83
7. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the value of the
active digit and the START keypad to enter the
value of the digit and advance to the next digit.
8. Press the START (enter) keypad with the last
active digit. The next option, “+020”, will appear
in the VFD.
NOTE: To program “+020” (Special Vend A
Auto-Shutdown Enable), refer to option 20. To
program other options, refer to the appropriate
section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option,
not a value.
2. While pressing and holding the NORMAL
keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the ready mode. Refer to Figure 2.
C828I
C828I