Filter
Top Products
Programming NetMaster
210140
38
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
8. Special Cycle Vend Price
“+008”
This option allows the owner to program the machines
to offer extra features to the customers for an added
vend price. This vend price will be displayed in the
VFD for 30 seconds starting 5 seconds after the start
(refer to option 49) of the first fill/agitate. Refer to
option 49, 50 and 51 for programming these features.
How to Program Special Cycle Vend Price
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES (+) or the COLD (-)
keypad until “PrOg” appears in the VFD. Press
the START (enter) keypad and “+001” will
appear in the VFD.
Figure 38
3. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the programmable
options until “+008” appears in the VFD. Refer
to Figure 39.
Figure 39
4. When “+008” appears in the VFD, press the
START (enter) keypad. There are five digits in
the Special Cycle Vend Price. The fifth digit will
appear in the VFD and will flash one second on,
one second off. Refer to Figure 40.
NOTE: If the vend price is $100.00 or more, the
fifth digit is “1”. If the vend price is $99.99 or less,
the fifth digit is “0”.
Figure 40
5. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the current
number until correct. Refer to Figure 41.
NOTE: The vend price can be set from 1 to 65,535.
Figure 41
6. Press the START (enter) keypad to enter the fifth
digit and display the remaining four digits. The
active digit will flash one second on and one
second off. Refer to Figure 42.
Figure 42
C762I
C770I
C770I
C826I
C860I
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
C827I
C826I
1
3
2
C827I