Filter
Top Products
Programming NetMaster
77
210140
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
33. Normal Wash Agitate Time
“+033”
This option allows the owner to set the amount of
wash agitate time for the Normal cycle.
How to Program Normal Wash Agitate
Time
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES (+) or the COLD (-)
keypad until “PrOg” appears in the VFD. Press
the START (enter) keypad and “+001” will
appear in the VFD.
Figure 129
3. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the programmable
options until “+033” appears in the VFD. Refer
to Figure 130.
Figure 130
4. When “+033” appears in the VFD, press the
START (enter) keypad. The current number of
minutes set for the Normal Wash Agitate Time
will appear in the VFD.
5. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the current
number of minutes displayed in the VFD to the
desired number of minutes. Refer to Figure 131.
NOTE: The Normal Wash Agitate Time can be set
from zero (0) to 15 minutes.
Figure 131
6. Press the START (enter) keypad when the
correct number of minutes appears in the VFD.
The next option, “+034”, will appear in the VFD.
NOTE: To program “+034” (Normal Extra Rinse
Agitate Time), refer to option 34. To program other
options, refer to the appropriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option,
not a value.
2. While pressing and holding the NORMAL
keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the ready mode. Refer to Figure 2.
C762I
C779I
C779I
C860I
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
1
32