Filter
Top Products
Programming NetMaster
95
210140
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Configuration #3 Programming
Use the table below (Table 6) to turn on or turn off
access for Manual Rapid Advance and Diagnostics,
and to change the Available Output Mode.
NOTE: Selecting “Ready Mode” for the available
output will turn off the available output after the
first pulse is received. Selecting “Until Start Mode”
will keep the available output on until the vend
price is satisfied. This feature is used for
aftermarket card read or central pay systems.
“+047”
Config #3 Value RADV/DIAG Access Available
0 OFF Ready Mode
1 OFF Until Start Mode
2 ON Ready Mode
3 ON Until Start Mode
Table 6