Filter
Top Products
Programming NetMaster
210140
74
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
30. Set Real-Time Clock Month
“+030”
This option allows the owner to set NetMaster’s
internal clock to the correct month.
How to Program the Clock Month
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES (+) or the COLD (-)
keypad until “PrOg” appears in the VFD. Press
the START (enter) keypad and “+001” will
appear in the VFD.
Figure 120
3. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the programmable
options until “+030” appears in the VFD. Refer
to Figure 121.
Figure 121
4. When “+030” appears in the VFD, press the
START (enter) keypad. The current month will
appear in the VFD.
5. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the month until
correct. Refer to Figure 122.
Figure 122
6. Press the START (enter) keypad when the
correct month appears in the VFD. The next
option, “+031”, will appear in the VFD.
NOTE: To program “+031” (Set Real-Time Clock
Year), refer to option 31. To program other options,
refer to the appropriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option,
not a value.
2. While pressing and holding the NORMAL
keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the ready mode. Refer to Figure 2.
C762I
C782I
C782I
C860I
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
1
32