Filter
Top Products
Programming NetMaster
45
210140
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
10. Special Vend A Start Hour
“+010”
This option allows the owner to set the hour that
Special Vend A will begin.
How to Program Special Vend A Hour
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES (+) or the COLD (-)
keypad until “PrOg” appears in the VFD. Press
the START (enter) keypad and “+001” will
appear in the VFD.
Figure 46
3. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the programmable
options until “+010” appears in the VFD. Refer
to Figure 47.
Figure 47
4. When “+010” appears in the VFD, press the
START (enter) keypad. The current start time (in
military time) will appear in the VFD.
NOTE: The hours will be displayed in military
time.
5. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the start hour to
the desired hour. Refer to Figure 48.
Figure 48
6. Press the START (enter) keypad when the
correct hour appears in the VFD. The next option,
“+011”, will appear in the VFD.
NOTE: To program “+011” (Special Vend A
Length in Hours), refer to option 11. To program
other options, refer to the appropriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option,
not a value.
2. While pressing and holding the NORMAL
keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the ready mode. Refer to Figure 2.
C762I
C772I
C772I
C860I
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
1
32