Filter
Top Products
Programming NetMaster
210140
80
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
36. Normal Final Spin Time “+036”
This option allows the owner to set the amount of time
for a final spin in the Normal cycle.
How to Program Normal Final Spin Time
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES (+) or the COLD (-)
keypad until “PrOg” appears in the VFD. Press
the START (enter) keypad and “+001” will
appear in the VFD.
Figure 138
3. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the programmable
options until “+036” appears in the VFD. Refer
to Figure 139.
Figure 139
4. When “+036” appears in the VFD, press the
START (enter) keypad. The current number of
minutes set for the Normal Final Spin Time will
appear in the VFD.
5. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the current
number of minutes displayed in the VFD to the
desired number of minutes. Refer to Figure 140.
NOTE: The Normal Final Spin Time can be set
from zero (0) to 15 minutes.
Figure 140
6. Press the START (enter) keypad when the
correct number of minutes appears in the VFD.
The next option, “+037”, will appear in the VFD.
NOTE: To program “+037” (Permanent Press
Wash Agitate Time), refer to option 37. To program
other options, refer to the appropriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option,
not a value.
2. While pressing and holding the NORMAL
keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the ready mode. Refer to Figure 2.
C762I
C797I
C797I
C860I
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
1
32