Filter
Top Products
Programming NetMaster
210140
46
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
11. Special Vend A Length in Hours
“+011”
This option allows the owner to set the length in hours
for Special Vend A.
How to Program Special Vend A Length
in Hours
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES (+) or the COLD (-)
keypad until “PrOg” appears in the VFD. Press
the START (enter) keypad and “+001” will
appear in the VFD.
Figure 49
3. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the programmable
options until “+011” appears in the VFD. Refer
to Figure 50.
Figure 50
4. When “+011” appears in the VFD, press the
START (enter) keypad. The current length in
hours will appear in the VFD.
5. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the current length
of hours to the desired number of hours. Refer to
Figure 51.
Figure 51
6. Press the START (enter) keypad when the
correct hour appears in the VFD. The next option,
“+012”, will appear in the VFD.
NOTE: To program “+012” (Special Vend A Start
Month), refer to option 12. To program other
options, refer to the appropriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option,
not a value.
2. While pressing and holding the NORMAL
keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the ready mode. Refer to Figure 2.
C762I
C773I
C773I
C860I
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
1
32