Filter
Top Products
Programming NetMaster
47
210140
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
12. Special Vend A Start Month
“+012”
This option allows the owner to set the month that
Special Vend A will begin.
NOTE: If Special Vend A Start Month, Start Date,
End Month, or End Date are programmed to zero
(default is zero), the special Vend A will be active
every week on the days programmed in option 9.
How to Program Special Vend A Start
Month
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES (+) or the COLD (-)
keypad until “PrOg” appears in the VFD. Press
the START (enter) keypad and “+001” will
appear in the VFD.
Figure 52
3. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the programmable
options until “+012” appears in the VFD. Refer
to Figure 53.
Figure 53
4. When “+012” appears in the VFD, press the
START (enter) keypad. The current start month
will appear in the VFD.
5. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the start month to
the desired month. Refer to Figure 54.
If “0” is selected and Special Vend A is on,
Special Vend A will occur at the time and days of
week selected, regardless of the month.
Figure 54
6. Press the START (enter) keypad when the
correct month appears in the VFD. The next
option, “+013”, will appear in the VFD.
NOTE: To program “+013” (Special Vend A Start
Date), refer to option 13. To program other options,
refer to the appropriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option,
not a value.
1. While pressing and holding the NORMAL
keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the ready mode. Refer to Figure 2.
C762I
C774I
C774I
C860I
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
1
32