Filter
Top Products
Programming NetMaster
27
210140
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
6. Press the START (enter) keypad to enter the fifth
digit and display remaining four digits. The
active digit will flash one second on and one
second off. Refer to Figure 12.
Figure 12
7. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the value of the
active digit and the START (enter) keypad to
enter the value of the digit and advance to the
next digit.
8. Press the START (enter) keypad with the last
active digit. The next option, “+003”, will
appear in the VFD.
NOTE: To program “+003” (Reg. Warm Wash
Vend Price), refer to option 3. To program other
options, refer to the appropriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option,
not a value.
2. While pressing and holding the NORMAL
keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the ready mode. Refer to Figure 2.
C827I
C827I