Filter
Top Products
Programming NetMaster
73
210140
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
29. Set Real-Time Clock Date
“+029”
This option allows the owner to set NetMaster’s
internal clock to the correct day of the month.
How to Program the Clock Date
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES (+) or the COLD (-)
keypad until “PrOg” appears in the VFD. Press
the START (enter) keypad and “+001” will
appear in the VFD.
Figure 117
3. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the programmable
options until “+029” appears in the VFD. Refer
to Figure 118.
Figure 118
4. When “+029” appears in the VFD, press the
START (enter) keypad. The current day of the
month will appear in the VFD.
5. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the day of the
month until correct. Refer to Figure 119.
Figure 119
6. Press the START (enter) keypad when the
correct day of the month appears in the VFD. The
next option, “+030”, will appear in the VFD.
NOTE: To program “+030” (Set Real-Time Clock
Month), refer to option 30. To program other
options, refer to the appropriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option,
not a value.
2. While pressing and holding the NORMAL
keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the ready mode. Refer to Figure 2.
C762I
C783I
C783I
C860I
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
1
32