Filter
Top Products
19
210140
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Opening the Service Door
(Coin Models Only)
Manually programming NetMaster requires the user to
open and close the service door. Opening and closing
the service door trips a switch allowing access to
various programming options, diagnostics and audit
capabilities.
The service door is located on the top of the meter case.
Refer to Figure 3.
NOTE: For card models, the manual programming
option is accessed by disconnecting and reconnecting
a plug behind the control panel, or by inserting the
appropriate card into the card reader.
Figure 3
WARNING
Any disassembly requiring the use of tools
must be performed by a suitably qualified
service person.
W299
W521IE1A
W521IE1A
SERVICE DOOR