Filter
Top Products
Programming NetMaster
210140
76
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
32. Set Real-Time Clock Century
“+032”
This option allows the owner to set NetMaster’s
internal clock to the correct century.
How to Program the Clock Century
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES (+) or the COLD (-)
keypad until “PrOg” appears in the VFD. Press
the START (enter) keypad and “+001” will
appear in the VFD.
Figure 126
3. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the programmable
options until “+032” appears in the VFD. Refer
to Figure 127.
Figure 127
4. When “+032” appears in the VFD, press the
START (enter) keypad. The current century will
appear in the VFD.
5. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the century until
correct. Refer to Figure 128.
NOTE: The digits “20” are used for century.
Figure 128
6. Press the START (enter) keypad when the
correct century appears in the VFD. The next
option, “+033”, will appear in the VFD.
NOTE: To program “+033” (Normal Wash
Agitate Time), refer to option 33. To program other
options, refer to the appropriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option,
not a value.
2. While pressing and holding the NORMAL
keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the ready mode. Refer to Figure 2.
C762I
C780I
C780I
C860I
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
1
32