Filter
Top Products
Programming NetMaster
75
210140
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
31. Set Real-Time Clock Year
“+031”
This option allows the owner to set NetMaster’s
internal clock to the correct year.
How to Program the Clock Year
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES (+) or the COLD (-)
keypad until “PrOg” appears in the VFD. Press
the START (enter) keypad and “+001” will
appear in the VFD.
Figure 123
3. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the programmable
options until “+031” appears in the VFD. Refer
to Figure 124.
Figure 124
4. When “+031” appears in the VFD, press the
START (enter) keypad. The current year will
appear in the VFD.
5. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the year until
correct. Refer to Figure 125.
NOTE: The year 2000 is “00”, the year 2001 is “01”
and so on.
Figure 125
6. Press the START (enter) keypad when the
correct year appears in the VFD. The next option,
“+032”, will appear in the VFD.
NOTE: To program “+032” (Set Real-Time Clock
Century), refer to option 32. To program other
options, refer to the appropriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option,
not a value.
2. While pressing and holding the NORMAL
keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the ready mode. Refer to Figure 2.
C762I
C781I
C781I
C860I
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
1
32