A SERVICE OF

logo

24 Installing PCMCIA and CF Cards
MX3X Reference Guide E-EQ-MX3XRG-H
Installing PCMCIA and CF Cards
Figure 1-21 PCMCIA and CF Card Location
There is one PC card slot (Slot 0) and one Compact Flash card slot (Slot 1) located under the
endcap. Slot 0 powers a wireless client PC card, PC SRAM card, ATA Flash card or a linear Flash
card. The slots hold only one card at a time. Slot 0 supplies .75 of an amp at 5V or 3.3V.
The second slot (Slot 1) is designed to support a Type I or II Compact Flash disk.
See “Chapter 2 Physical Description and Layout”, section titled “PCMCIA Cards” for further
information.