292 Technical Specifications
MX3X Reference Guide E-EQ-MX3XRG-H
Chapter 5 – MX3-RFID Updated RFID Configuration Utility:
• Added Filter, Firmware, and Format tabs to RFID Configuration Utility
Panel.
• 96 bit Class 1 tag support added.
• EPC Tag Data Formatting added.
• Added robust Read support.
Revision C, December 2004
Entire Manual Noted differences between MX3X standard and the MX3-RFID device.
Chapter 1 – Introduction Consolidated ActiveSync information and instructions.
Corrected part numbers for MX3-RFID accessories.
Chapter 4 – System
Configuration
Updated LAUNCH persistent storage information. Added Administration to control
panel.
Chapter 5 – MX3-RFID Added chapter specifically for the MX3X with an RFID module.
Chapter 6 – AppLock Added chapter specifically for AppLock on MX3X and MX3-RFID devices.
Revision B, August 2004
Chapter 1 – Introduction Corrected Accessories section “Cables for Cradle and MX3X Serial Ports”.
Chapter 2 – Physical
Description and Layout
Updated “USB Host/Client Port” section. Added cable part number to “Storage
Cradles”. Updated “Storage Cradles” and “Tethered Scanners” sections.
Chapter 4 – System
Configuration
Updated Scanner Key graphic to show Field Exit option to Programmable Scan Keys
for 5250 devices only.
Appendix B – Technical
Specifications
Added section titled “Cable Specifications”.
Revision A, First Release, June 2004
