178 Summit Client Configuration
MX3X Reference Guide E-EQ-MX3XRG-H
Diags Tab
The Diags panel can be used for troubleshooting network traffic and wireless connectivity issues
for the IP address shown above the Release/Renew button.
Administrator login is required for the (Re)connect button function.
Note: Diagnostics and Site Survey functions are not available in this release.
Figure 5-6 SCU – Diags Tab
Buttons
Button Function
(Re)connect Tap this button to apply, or reapply, the current config profile and attempt to
associate or authenticate to the wireless LAN. Activity is logged in the
Diagnotic Output text box on the lower part of the panel. Administrator login
required for this function.
Diagnostics Tapping this button begins an attempt to (re)connect to the wireless LAN.
This option provides more data in the Diagnostics Output text box than the
(Re)connect option. The data dump includes network card state, profile
settings, global settings, and a list of access points by SSID broadcasting in
the client’s immediate area. Not available in this release.
Start Ping Tap the text box and type an IP address to Ping. Tap the Start Ping button to
start pinging the IP address. The button name changes to Stop Ping. Tap Stop
Ping to end the pinging process. The pinging process ends when any other
button on this panel is tapped or a different menu tab is selected. Ping results
are displayed in the Diagnostic Output text box.
Release/Renew Release the current IP address to obtain a new IP address. This option renews
the IP address when applicable. Activity is logged in the Diagnostic Output
text box. If a fixed IP address has been assigned to the client device, this is
also noted in the Diagnostic Output box. The current IP address is displayed
above the Release/Renew button.
Site Survey Not available in this release.
