Summit Client Configuration 177
E-EQ-MX3XRG-H MX3X Reference Guide
Status Tab
Figure 5-5 SCU – Status Tab
This screen displays information on the current profile and network connection. Information
cannot be edited or changed on the Status panel. The panel displays:
• The config profile being used
• The client name, IP address and MAC address
• The status of the network connection (down, associated, authenticated, etc.)
• The name, IP address and MAC address of the Access Point maintaining the
connection to the network.
• Signal strength (changes with network activity).
• Channel currently being used for wireless traffic.
• Current transmit power in mW.
• Rate in Mbps.
Note: After completing radio configuration, it is good practice to review this screen to verify
the radio has associated (no encryption, WEP) or authenticated (LEAP, any WPA), as
indicated above.
