172 Summit Client Configuration
MX3X Reference Guide E-EQ-MX3XRG-H
Main Tab
Factory Default Settings
Admin Login SUMMIT
Radio Enabled
Active Config Default
Figure 5-2 SCU – Main Tab
The Main tab displays information about the client device including:
• SCU (Summit Client Utility) version
• Driver version
• Regulatory Domain
• Copyright Info
• Active Config
• Status of the network device (Down, Associated, Authenticated, etc).
The Active Config (profile) can be switched without logging in to Administrator mode. Selecting
a different profile from the drop down list does not require logging in to Administrator mode. The
profile must already exist. LXE recommends performing a Suspend/Resume function when
changing profiles. Profiles can be created or edited after the Administrator password has been
entered and accepted (LXE recommends that only the “default” profile be edited).
The Disable Radio button is used to disable the network card. Once disabled, the button label
changes to Enable Radio.
The Admin Login button provides access to editing client device parameters. Config and Global
Settings may only be edited after entering the Admin Login password. The password is case-
sensitive. Once logged in, the button label changes to Admin Logout. To logout, either tap the
Admin Logout button or exit the SCU without tapping the Admin Logout button.
