160 Advanced
MX3X Reference Guide E-EQ-MX3XRG-H
Barcode Tab
Access: Start | Settings | Control Panel | Scanner | Barcode tab
Figure 4-16 Barcode Tab
Prefix / Suffix
Note: Prefix / Suffix is only available when Use Advanced Barcode Processing is disabled.
Figure 4-17 Barcode – Prefix / Suffix
Prefix/Suffix (and pre-existing data) is unavailable when Use Advanced Barcode Processing is
enabled.
Strip Leading / Strip Trailing Characters
This feature, when enabled, strips the specified number of characters from a barcode, either from
the beginning (leading) or at the end (trailing), or both.
When this feature and the Add Prefix and / or Add Suffix features are both enabled, the leading
and trailing characters are stripped before the prefix or suffix is appended.
The configuration for stripping leading and trailing characters is specified independently. To
enable, either or both of the checkboxes labeled Strip Leading and Strip Trailing must be checked.
Then the number of characters to be stripped can be typed into the edit control or set using the spin
control on the right of the edit control.
