A SERVICE OF

logo

Open as PDF
next previous
Summit Client Configuration 183
E-EQ-MX3XRG-H MX3X Reference Guide
No Security
Start the Summit Utility by tapping the Summit Client icon.
Tap the Admin Login button on the Main panel. Enter the Administrator password and tap OK.
Tap the Config tab.
Figure 5-9 Summit Profile with No Security
Enter the SSID of the Access Point assigned to this profile.
Set Auth Type to Open.
Set EAP Type to None.
Set Encryption to None.
Tap the Commit button
5
to save the new profile configuration.
Perform a warm reset to connect using the new profile configuration.
5
LXE recommends performing a soft reset or Suspend/Resume function each time the Commit button is
tapped.