144 Barcode Manipulation
MX3X Reference Guide E-EQ-MX3XRG-H
Parameters
Enable This checkbox enables (checked) or disables (unchecked) the symbology field.
The scanner driver searches the beginning of the barcode data for the type of ID
specified in the Barcode tab – Enable Code ID field (AIM or Symbol) plus any custom
identifiers.
When a code ID match is found as the scanner driver processes incoming barcode data,
if the symbology is disabled, the barcode is rejected. Otherwise, the other settings in the
dialog are applied and the barcode is processed. If the symbology is disabled, all other
fields on this dialog are grayed.
When there are no customized settings, and the Enable checkbox is unchecked (All is
selected and no other settings are customized) a confirmation dialog is presented to the
user “You are about to disable all scan input – Is this what you want to do?”. Tap the
Yes button or the No button. Tap the X button to close the dialog without making a
decision.
If there are customized settings, uncheck the Enable checkbox for the All symbology.
This results in disabling all symbologies except the customized ones.
Min This field specifies the minimum length that the barcode data (not including Code ID)
must meet to be processed. Any barcode scanned that is less than the number of
characters specified in the Min field is rejected. The default for this field is 1.
Max This field specifies the maximum length that the barcode data (not including Code ID)
can be to be processed. Any barcode scanned that has more characters than specified in
the Max field is rejected. The default for this field is All. If the value entered is greater
than the maximum value allowed for that symbology, the maximum valid length will be
used instead.
