A SERVICE OF

logo

Cisco Client Configuration 201
E-EQ-MX3XRG-H MX3X Reference Guide
Navigate to the Wireless Network Properties configuration screen.
Tap the Properties button.
Check “Validate server” .
Tap OK to dismiss the configuration boxes.
Figure 5-38 Advanced Wireless Settings, Authenticated SSID
Once the authentication completes, the status changes to show the mobile device has authenticated
to the <SSID>, as shown in the figure above.
Tap the IP Information tab and make sure there is a valid IP address as shown in the figure labeled
“IP Information Tab”, earlier in this chapter.