122 Wavelink Avalanche Enabler Configuration
MX3X Reference Guide E-EQ-MX3XRG-H
File Menu Options
Connect The Connect option under the File menu allows the user to initiate a manual
connection to the Agent and Management Console. The connection methods, by
default, are wireless and COM connections. Any updates available will be
applied to the mobile device immediately upon a successful connection.
Abort Stop transmission.
Settings The Settings option under the File menu allows the user to access the control
panel to locally configure the Enabler settings. The Enabler control panel is, by
default, password protected. The default password is system. The password is
not case-sensitive.
Scan Config Note: LXE does not support the Scan Configuration feature on Windows CE
devices. The Scan Config option under the File menu allows the user to
configure Enabler settings using a special barcode that can be created using the
Avalanche Management Console utilities. Refer to the Wavelink Avalanche
Manager User Guide for details.
Exit The Exit option is password protected. The default password is leave. The
password is not case-sensitive.
If changes were made on the Startup/Shutdown tab screen, then after entering the
password, tap OK and the following screen is displayed:
Change the option if desired. Tap the X button to cancel Exit. Tap the OK button
to exit the Avalanche applet.
