202 Cisco Client Configuration
MX3X Reference Guide E-EQ-MX3XRG-H
PEAP/GTC Authentication Configuration
The Microsoft supplicant authenticates a user with the PEAP/GTC protocol.
Configuring the PEAP/GTC Supplicant
With the client parameters configured set the EAP type to Cisco PEAP as shown below.
Figure 5-39 PEAP/GTC Wireless Network Properties
If the EAP type box text is not exactly as shown see “Installing Client Device Drivers”, earlier in
this chapter, to change the client CAB file.
Click the Properties button.
Figure 5-40 PEAP Properties
When first configuring and authenticating, do not validate the server certificate. This allows the
user authentication to be tested. When user authentication is successful, return to this screen and
validate the server certificate as shown later in this section.
Check the Always try to resume secure session box.
Note: This box must be checked for the LXE device to roam from one AP to another AP.
Tap the OK button.
