Filter
Top Products
- 3 -
2.0 SPECIFICATIONS
Dimensions
Compact (5kg) Medium (6kg) Large(7kg)
Height to closed Lid 900mm-930mm 900mm-930mm 900mm-930mm
Height to open Lid 1280m-1310mm 1305mm-1335mm 1350mm-1380mm
Width 560mm 600mm 650mm
Depth 560mm 600mm 650mm
Inlet hose length 1100mm 1100mm 1100mm
Dry weight Packed 48Kg 52Kg 58Kg
Dry weight unpacked 43Kg 46Kg 51Kg
Wash Load AS2040 5.0-5.5Kg 6.0-6.5Kg 7.0-7.5Kg
High Water Capacity 63-68L 76-82L 89-94L
Finish
Cabinet Prepaint (Polyester)
Inner Bowl Stainless Steel grade 430T
Lid, Console, Outer Bowl, Agitator Polypropylene
Touch Panel Polycarbonate
Water fill temp (Default settings)
Hot 60
o
C
Hot / Warm 50
o
C
Warm 40
o
C
Warm / Cold 35
o
C
Cold as per supply temperature.
Inlet hot water temperature is best
at 65
o
C and should not exceed
75
o
C.
Motor. See Section 4.2 for specifications on the stator and rotor.
Pump. See Section 4.7 for specifications.
Water Valves. See Section 4.5 for specifications.
Inlet Water Flow Rate 3 litres per minute minimum.
Standpipe height from floor Min 850mm Max 1200mm.
Thermistor
Phase 5. NTC-type temperature sensor Resistance 10k ohms @ 25
o
C. 12.5k ohms @ 20
o
C
In Phase 1-4 this part is not serviceable and mounted within the Motor Controller.
Inner Bowl Speed
Fast Spin 1,000 RPM
Medium Spin 700 RPM
Slow 300 RPM
Stir Speed 25 RPM
Fabric Softener Dosage
75cc
Electric Supply
220/240V AC 50Hz
Max Current
2.8 amps
CAUTION
ALL TERMINALS
AND INTERNAL
PARTS SHOULD
BE TREATED
AS LIVE.
Acceptable weights for the Inner Bowl
Small (5kg) 10.9-11.5kg
Medium (6kg) 8.9-9.4kg
Compact (7kg) 7.0-7.5kg