Filter
Top Products
- 62 -
12.0 MECHANICAL SERVICE SECTION
12.1 COMPLETE DISASSEMBLY
CAUTION: Ensure power and water supplies are disconnected before servicing. There is still
mains power within the console when on/off switch in the `off' position.
1. Isolate from the power supply.
2. To remove the lid, open it to the upright position and lift it clear.
An anti-static wrist strap must be used when handling electronic modules. Clip the strap to the earth
terminal at the rear of the top deck. Modules removed from Smartdrive for return must be protected from
possible electrostatic damage while in transit by the use of the specialised packaging in which they were
received.
3. Remove the 2 screws from the rear of the top console, disconnect the earth lead. The console can
now be raised for access to the Motor Controller Module, Display Module and associated wiring.
PHASE 5 TOPDECK SHOWING WIRING CONNECTIONS