Filter
Top Products
48
SELF DIAGNOSTIC ROUTINES
Automatic Service Diagnostics Mode
STEP
1
2
3
4
5
DESCRIPTION
Nutate + Fill
Nutate + Recirc
Nutate + Fill + Drain
Nutate + Fill + Drain
Spin + Drain
Return to Standby
WATER
TEMP
Cold
Cold
Warm
Hot
Off
Off
DISPENSER
ACTIVATED
Fresh
Fab Soft
Bleach
Detergent
Off
Off
PUMP
MOTOR
Off
Recirc
Drain
Drain
Drain
Off
DRIVE
MOTOR
Nutate
Nutate
Nutate
Nutate
Spin
Off
DRIVE
SPEED
300
275
250
225
500
DISPLAY
99-81
80-61
60-41
40-21
20-01
0
ERROR CODES
Suds Lock
S L
The motor controller senses a suds lock condition by analyzing the current draw on the drive
motor. If a potential suds lock is detected, the control tries up to 3 times to clean out the unit
with a mini-cycle. See Use and Care Guide for more information.
“SL” is displayed if suds are detected but the unit is unable to clean out suds. This may
indicate a bad pump, an extra heavy load, excessive detergent or excessive suds.
Press STOP/CANCEL to clear the display.
Flashing
Display
Time
Open Lid
If the lid opens while the unit is in running mode, time remaining will flash in the display.
Close the lid and press START to continue with the cycle.
The automatic service diagnostics mode is a short demonstration to provide an automatic check for
major wash functions.
The automatic service diagnostics mode is activated by pressing:
SOAK - SOIL LEVEL - SOAK - SOIL LEVEL
within five (5) seconds while the machine is in Standby Mode. The 7-segment LED will display the
countdown of the time remaining for this test in seconds. A Soil Level LED for each dispenser will be
lit while the valve is actuated.
Fig. 4-1
LED
LIT
Heavy
Normal
Light
Refresh
None
Extra Heavy
Sta tus
Sta rt
St op
Cancel
Soak
Estimated Time
Rem aining
Wash
Rin se
Ext r a
Rin se
Spin &
Fluf f
Cycle
Complete
Heavy
Options
Normal Normal
Light
Refresh
Hot
Wa rm
Wa rm
Wa rm
Cold
Cold
Cold
Cold
Cold
Cold
Assure d
Wat er
Tem p
Lo ud er
Softer
Off
SOAK
SOIL
LEVEL