Filter
Top Products
30
Rinse & Spin
Use this option to get a combination of rinses and spins followed by a high-speed spin. The time
displayed will include an estimate of how long it will take to fill and drain the washer. Fabric softener
can be added to the Fabric Softener dispenser.
When to use Rinse & Spin:
• For loads that need rinsing only.
• For completing a cycle after the power has been off.
• To add fabric softener to load
To use or change Rinse & Spin settings:
1. Add fabric softener to the dispenser (if desired).
2. Press the RINSE & SPIN OPTIONS control until the RINSE & SPIN indicator light glows.
3. Press START.
PHASE STEP
DESCRIPTION OF
SEQUENCE
NOTES
WAT ER
TEMP
DISPENSER COMMENT
PUMP
MOTOR
ACTI ON
DRIVE
MOTOR
ACTI ON
DRIVE
MOTOR
SPEED
DURATION
(MIN:SEC)
RINSE 1 OPTIONAL FLUFF 19 OFF OFF OFF NUTATE 275 00:08
2 STATIC FILL – COLD 9,19 COLD DETERGENT PS CONTROLLED OFF OFF 0 VAR
3 SPIN + RCRC + FILL 9 COLD FRESH PS CONTROLLED RECIRC SPIN 60 00:30+
4 NUTATE + RCRC + FILL COLD FRESH PS CONTROLLED RECIRC NUTATE 275 00:30
5 NEUTRAL DRAIN OFF OFF DRAIN OFF 0 00:30
6 SPIN + DRAIN OFF OFF DRAIN SPIN 300 00:15
7 NEUTRAL DRAIN OFF OFF DRAIN OFF 0 00:30
8 NUTATE + FILL COLD DETERGENT TIMED FILL OFF NUTATE 275 00:10
9 NUTATE + RCRC + FILL 9 COLD FRESH PS CONTROLLED RECIRC NUTATE 275 VAR
10 NEUTRAL DRAIN OFF OFF DRAIN OFF 0 00:30
11 SPIN + DRAIN OFF OFF DRAIN SPIN 300 00:15
12 NUTATE + DRAIN OFF OFF DRAIN NUTATE 275 00:08
13 NEUTRAL DRAIN OFF OFF DRAIN OFF 0 00:22
14 SPIN + DRAIN W/ CND 14,16 OFF OFF PS CONTROLLED DRAIN SPIN 500 00:30+
15 NUTATE + DRAIN OFF OFF DRAIN NUTATE 275 00:30
16 NUTATE + FILL COLD DETERGENT TIMED FILL OFF NUTATE 275 00:10
17 NUTATE + RCRC + FILL 9 COLD FRESH PS CONTROLLED RECIRC NUTATE 275 VAR
18 FABRIC SOFTENER 4 COLD FAB SOFT TIMED FILL OFF OFF 0 01:00
19 SPIN + RCRC + FILL 9 COLD FRESH PS CONTROLLED RECIRC SPIN 60 02:00+
20 NUTATE+RECIRC COLD OFF RECIRC NUTATE 275 00:05
21 NUTATE + RCRC + FILL 9 COLD DETERGENT PS CONTROLLED RECIRC NUTATE 275 03:55+
22 NEUTRAL DRAIN OFF OFF DRAIN OFF 0 00:30
SPIN & FLUFF 23 SPIN + DRAIN W/ SUDS 17 OFF OFF DRAIN SPIN 500 01:30
24 NUTATE + DRAIN OFF OFF DRAIN NUTATE 275 00:15
25 SPIN + DRAIN W/ CND 6,14,16 OFF OR
WAR M
OFF OR FRESH PS CONTROLLED DRAIN SPIN 800 05:00+
26 FLUFF 15 OFF OFF OFF NUTATE 275 00:30
27 PLATE LEVEL 15 OFF OFF OFF SPIN 60 00:05
END OF CYCLE END OF CYCLE (EOC) OFF OFF OFF OFF 19:56
Suds Lock Detection/Cleanout
Suds lock detection occurs during the last spin in the wash cycle phase of all cycles except BULKY
ITEMS and WOOL. If suds are detected by the control, the cycle timer is stalled and a suds cleanout
cycle is run. At the end of the suds cleanout cycle, the detectionprogram is run again. The cleanout
is run up to maximum of 3 times. If suds are still detected at the end of the last cleanout, the unit
drops out of the cycle and displays “SL” on the 7-segment.
PHASE STEP DESCRIPTION OF
SEQUENCE
NOTES WATER
TEMP
DISPENSER COMMENT PUMP
MOTOR
ACTION
DRIVE
MOTOR
ACTION
DRIVE
MOTOR
SPEED
DURATION
(SEC)
CLEANOUT 1 NEUTRAL DRAIN OFF OFF DRAIN OFF 0 30
2 NUTATE + FILL COLD DETERGENT TIMED FILL OFF NUTATE 300 15
3 NEUTRAL DRAIN OFF OFF DRAIN OFF 0 15
4 SPIN + DRAIN + FILL COLD FRESH TIMED FILL DRAIN SPIN 60 60
5 SPIN + DRAIN OFF OFF DRAIN SPIN 60 30
6 SPIN + DRAIN + FILL COLD FRESH TIMED FILL DRAIN SPIN 60 60
7 SPIN + DRAIN OFF OFF DRAIN SPIN 60 30
8 SPIN + DRAIN + FILL COLD FRESH TIMED FILL DRAIN SPIN 60 60
9 SPIN + DRAIN OFF OFF DRAIN SPIN 60 60
10 DETECTION ROUTINE
= SPIN+DRAIN W/SUDS
PROFILE
OFF OFF IF SUDS ARE
DETECTED, REPEAT
FROM STEP 1 OF
CLEANOUT
DRAIN SPIN 500 90
IF SUDS ARE NOT DETECTED, CONTINUE WITH THE NEXT STEP IN CYCLE 7:30