Filter
Top Products
43
F8208801
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Manual Reset
This feature allows the owner to reset the washer-
extractor control’s programming data to the factory
default settings by pressing a sequence of pads on the
control. For an explanation of the Factory Default
Settings, refer to Default Washer Settings.
How to Enter Manual Reset
1. Control must be in Manual Mode to start.
Refer to Entering the Manual Mode.
2. Press the #3 ( ) or the #6 ( ) keypad until
“rSEt” appears.
3. Press the START (enter) keypad. The control will
be blank until the programming is complete.
Once the program has been reset, the control will
display the next Manual Mode option, “dIAg”.
>
<