Filter
Top Products
Programming Control
13
F8208801
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Table 1 (continued)
Option
Number
Option
Display
Description Default
Value
Value Range
11 “Codn” Cooldown Enable/Temperature “oFF”“oFF” or 50°F-160°F/10°C-71°C
12 “PtEn” Production Test Cycle (On/Off) “on”“on”/“oFF”
13 “rAEn” Manual Rapid Advance (On/Off) “on”“on”/“oFF”
14 “nCtd” No Cycle Time Display “oFF”“on”/“oFF”
15 “PCtd”*** Programmable Cycle Time Display 0 0 = Disabled / 1 = Enabled
16 “SdAd” Slow Drain Detection Adjust 0 0-255 seconds
17 “rtC-” Real Time Clock ——
a.
“rtC1” Set Real Time Clock Minutes — 00-59
b.
“rtC2” Set Real Time Clock Hours — 00-23
c.
“rtC3” Set Real Time Clock Day — “001” (Sunday)-“007” (Saturday)
d.
“rtC4” Set Real Time Clock Date — 1-31
e.
“rtC5” Set Real Time Clock Month — 1-12
f.
“rtC6” Set Real Time Clock Year — 00 (2000)-99
g.
“rtC7” Daylight Savings Option “on”“on”/“oFF”
18 “dAEn” Manual Diagnostics (On/Off) “on”“
on”/“oFF”
19 “FLo” Low Water Level 31-10
20 “FnEd” Medium Water Level 15 11-20
21 “FHI” High Water Level 27 21-30
22 “tCF” Temperature Controlled Fill “oFF”“on”/“oFF”
23 “ALd” Auto-Water Leak Detection ——
a.
“ALd1” Auto-Water Leak Detection (On/Off and cycles) “oFF”“oFF”/0-127 (Cycles)
b.
“ALd2” Auto-Water Leak Detection Hour 0 0-23
c.
“ALd3” Auto-Water Leak Detection Day of Week ”127”* “0”-“127”*
*Refer to programming section for value definition.
**Refer to the Operation Manual for default cycle setting information.
***Option not available on Software Version 1.
Table 1