Filter
Top Products
Programming Control
37
F8208801
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
17. Set Real-Time Clock “rtC-”’
This option allows the owner to set the control’s
internal clock to the correct time and date.
How to Program the Time and Date
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the #3 ( ) or the #6 ( ) keypad until
“Prog” appears in the display. Press the START
(enter) keypad and “dCYC” will appear in the
display.
3. Press the #3 ( ) or the #6 ( ) keypad to scroll
through the programmable options until “rtC-”
appears in the display. Press the START keypad
and “rtC1” will appear in the display.
4. Press the #3 ( ) or the #6 ( ) keypad to scroll
through the programmable options. Refer to
Figure 10.
5. When the desired option appears in the display,
press the START (enter) keypad. The current
value will appear in the display.
6. Press the #3 ( ) or the #6 ( ) keypad to increase
or decrease the minutes, hours, day of week, date
of the month, month, year to the correct time or
date.
NOTE: The hours will be displayed in military
time. For day of week, Sunday is considered day
one (001), Monday is day two (002) and so on. For
year, the year 2000 is “00”, the year 2001 is “01”
and so on.
If programming Daylight Saving, “rtc7”, “on” enables
Daylight Saving Time and “oFF” disables Daylight
Saving Time.
7. Press the START (enter) keypad when the correct
time or date appears in the display. The next Set
Real-Time Clock option will appear in the
display.
NOTE: To program “dAEn” (Manual Diagnostics
[on/off]), press the #5 (<) keypad and refer to
option 18. To program other options, refer to the
appropriate section.
How to Exit Programming Feature
Press the #5 (<) keypad until the control returns to
Start Mode.
“rtC1” Programs Minutes
“rtC2” Programs Hours
“rtC3” Programs Day of Week
“rtC4” Programs Date of Month
“rtC5” Programs Month
“rtC6” Programs Year
“rtC7” Programs Daylight Saving
Table 10
>
<
>
<
>
<
>
<