Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Programming Control
F8208801
32
8. Hot Water Temperature “FH”
This option allows the owner to program the hot water
temperature for models equipped with temperature
sensing capabilities.
How to Program Hot Water Temperature
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the #3 ( ) or the #6 ( ) keypad until
“Prog” appears in the display. Press the START
(enter) keypad and “dCYC” will appear in the
display.
3. Press the #3 ( ) or the #6 ( ) keypad to scroll
through the programmable options until “FH”
appears in the display.
4. When “FH” appears in the display, press the
START (enter) keypad. A number will appear in
the display. This number corresponds to the
current Hot Water Temperature value.
5. Press the #3 ( ) or the #6 ( ) keypad to increase
or decrease the current Hot Water Temperature
value to the desired Hot Water Temperature
value.
NOTE: Hot Water Temperature is selectable
between 35° and 194° Fahrenheit (2° and 90°
Celsius). Default temperature is 140° Fahrenheit
(60° Celsius).
NOTE: Refer to option 7 to select Celsius or
Fahrenheit display.
6. Press the START (enter) keypad when the correct
number appears in the display. The next option,
“FHC”, will appear in the display.
NOTE: To program “FHC” (Warm Water
Temperature), refer to option 9. To program other
options, refer to the appropriate section.
How to Exit Programming Feature
Press the #5 (<) keypad until the control returns to
Start Mode.
9. Warm Water Temperature
“FHC”
This option allows the owner to program the warm
water temperature for models equipped with
temperature sensing capabilities.
How to Program Warm Water Temperature
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the #3 ( ) or the #6 ( ) keypad until
“Prog” appears in the display. Press the START
(enter) keypad and “dCYC” will appear in the
display.
3. Press the #3 ( ) or the #6 ( ) keypad to scroll
through the programmable options until “FHC”
appears in the display.
4. When “FHC” appears in the display, press the
START (enter) keypad. A number will appear in
the display. This number corresponds to the
current Warm Water Temperature value.
5. Press the #3 ( ) or the #6 ( ) keypad to increase
or decrease the current Warm Water Temperature
value to the desired Warm Water Temperature
value.
NOTE: Warm Water Temperature is selectable
between 35° and 194° Fahrenheit (2° and 90°
Celsius). Default temperature is 100° Fahrenheit
(38° Celsius).
NOTE: Refer to option 7 to select Celsius or
Fahrenheit display.
6. Press the START (enter) keypad when the correct
number appears in the display. The next option,
“FC”, will appear in the display.
NOTE: To program “FC” (Cold Water
Temperature), refer to option 10. To program other
options, refer to the appropriate section.
How to Exit Programming Feature
Press the #5 (<) keypad until the control returns to
Start Mode.
>
<
>
<
>
<
>
<
>
<
>
<