Filter
Top Products
Operation Manual Section 1: Introduction
3-9000-744 Rev F September 2013
Extractor tool pre-use and post-use inspection 7
6. Use USM Extractor Tool pre-use and post-use Inspection checklist (see Appendix B) to
log the inspection and to report any issues found.
7. All technicians who use the extractor tool must take and successfully pass the Daniel
Extractor Tool course prior to using this tool. Technicians who do not pass the Daniel
Extractor course must not use the extractor tool until they repeat and pass the course.
The service manager must verify that the technicians are trained and have successfully
passed the Daniel Extractor Tool course before operating the extractor tool.
8. The Daniel Extractor Tool course must be retaken every two years to ensure safe use of
the tool
. The service manager must verify that all technicians operating the extractor
tool retake the Daniel Extractor Tool course once every two years.