Filter
Top Products
Operation Manual Section 1: Introduction
3-9000-744 Rev F September 2013
Overview 1
11
12
13
14
15
16
Section 1: Introduction
1.1 Overview
The Daniel Ultrasonic Split Clamp Extractor Tool is designed for use on Daniel SeniorSonic
TM
4 Path Gas Ultrasonic Meters only. The Daniel Ultrasonic Split Clamp Extractor Tool Operation
Manual (P/N 3-9000-744) provides operating instructions for 4 Path meters fitted with T- Slot
design transducer mounts (see Figure 1-2). The following mounts are included:
• 150 ANSI to 600 ANSI Ultrasonic meters with style J mounts (example J00, J25, J50 and
J75)
• 900 ANSI and 1500 ANSI Ultrasonic meters with style K mounts (example K00, K25,
K50, and K75)
All transducer mounts and holders are stamped, identifying the mount length, mount style,
serial number, and purchase order information (see Figure 1-1 and) Figure 1-2).
Figure 1-1 J-mount transducer identification
A.
B.
A. Mount length identifier
B. Mount style identifier