Filter
Top Products
Operation Manual Section 1: Introduction
3-9000-744 Rev F September 2013
Extractor tool specifications 5
Figure 1-5 Split clamp extractor tool assembly dimensions (inches)
Table 1-1 Daniel extractor tool specifications
Extractor tool weight by disassembled component Weight (lbs),
ANSI 600 ANSI 1500
Suitcase 52 52
Extractor tool valve assembly (Split clamp) 24 30
Lubricator chamber assembly 32 42
Extractor tool piston assembly 15 15
2 hoses (one black and one stainless steel) 4 4
Tool kit 17 17
Extractor tool total weight 144 160
Extractor tool length and operating temperature Length and operating temperature range
Tool length
(see Figure 1-5)
Operating temperature - 4 °F to 212 °F (-20 °C to 100 °C)
HAZARDOUS MATERIALS
Do not use the Daniel Extractor Tool in environments with hydrogen sulfide present. The tool is
not designed for use in these environments.
Failure to follow these instructions will cause death from asphyxiation, fire, or explosion.